Triple Soda Rocket Launcher





Complete Assembled Triple Bottle Rocket Launcher Shipped to you!
Product Features

Triple Soda bottle water rocket launcher 95% preassembled.
Launcher supports air pressures as low as 20 PSI up to 120 PSI and pressurizes all loaded bottles at the same time and to the same pressure.
Includes adjustable triggers and instructions for assembly and launching
The launcher will enable you to propel a 1, 1.5 or 2-liter plastic (PET) soda pop bottle over 250 ft
Great item for people of all ages for fun, science projects, school classes, parties, etc.

Complete preassembled triple water rocket launcher capable of shooting 1, 1.5 or 2-liter soda bottles
Price Includes shipping on U.S Domestic orders, INTERNATIONAL ORDERS CONTACT US
Ready to shoot triple soda bottle water rocket launcher, all you need are the bottles!

Product Description
One Triple soda bottle water rocket launcher with the adjustable trigger mechanism and operating instructions. Launcher ships 95% preassembled. Screw on the launch posts set the trigger positions, thread the string under the pipe, and it is ready to use! The launcher will enable you to propel a 1, 2 or 3? soda pop (PET) bottles over 250 ft. into the sky using only water and compressed air from a bicycle pump, a foot pump for a car, or an air compressor for tools and painting. Fuel (water and air) is essentially free and readily available allowing countless launches without additional expense. Launcher supports air pressures as low as 20 PSI up to 120 PSI. You will be amazed at how high only 40 PSI will propel a bottle with fins attached to it. After pumping up the bottles to the PSI of your choice (up to 3 bottles can be pressurized simultaneously to the same pressure), you control when the launch occurs by pulling on the string to release the triggers from a safe distance and out of the splash zone. 2 Control valves allow each bottle to be launched independently of the others so you do not have to worry about a premature launch impacting other bottles. Launcher supports 1L, 1.5L and 2-liter plastic (PET) bottles. Great item for people of all ages for fun, science projects, school classes, parties and may well draw a crowd where it is used. Made in the USA from durable non-corrosive Schedule 40 PVC pipe. No additional materials are required for this launcher. This is a complete launcher. No gluing, taping, cutting, or measuring required.

INCLUDED WITH YOUR PURCHASE: DIY Information on how to MAKE your OWN FREE Rockets, Thrusters & MORE!! Picture Shown For Rocket Only
Purchase the Triple Soda Bottle Rocket Launcher and you will also get FREE Access to DIY Bottle Rocket Construction, HOW TO BUILD A THRUSTER, plus MUCH MORE FREE INFORMATION on how to make the most of your purchase and tons of information on how to LAUNCH your ROCKETS HIGH INTO THE AIR!

You will need to supply:
Plastic (PET) soda pop bottles (for your rockets)
water, air source (bicycle pump, foot pump, or air compressor)
2 tent pegs, wooden stakes, wire hanger, rock, or brick to keep launcher from moving when the string is pulled.
Tools required for assembly and adjustment:
Launch post can be screwed on by hand for most people because of the Teflon tape, but if this is too hard then an adjustable wrench or pliers will be necessary.
Flat blade screwdriver (or 5/16 in. or 8 mm socket wrench).
Order Your Complete Triple Soda Bottle Water Rocket Launcher Today!



There are no reviews yet.

Be the first to review “Triple Soda Rocket Launcher”

Your email address will not be published. Required fields are marked *

Scroll to Top