6x10 Utility Trailer Plans

$14.95

SKU 6x10UTILTRLR021014 Categories ,

6×10 Utility Trailer Plans

This is a standard 6 by 10 Utility Trailer that would cost $1,000 or more if you purchased it outright. By building your own trailer you will save money and also get a higher quality trailer.

Professionally designed 6×10 trailer plans with fabrication shop drawings, individual piece part drawings. Notes with suggestions on where to obtain salvaged axles and steel for construction and more!

DOWNLOAD A SAMPLE OF THE 6X10 TRAILER DRAWINGS BELOW

Utility Trailer Plan Details

  • Plans Very Complete & Thorough – with ENGLISH & METRIC Dimensions
  • Complete Bill of Material Cut List
  • Fabrication Notes and Construction Details
  • Complete purchased parts list should you decide to purchase these items (many could be salvaged)
  • Purchased parts websites with links
  • General Trailer Information, state tow laws, safety, wiring diagrams and more!

OVER 50 PAGES TOTAL

Build Your Own 6×10 Utility Trailer

UTILITY TRAILER SPECIFICATIONS:

TIRES: ST205/75D15…LOAD RANGE “C”
RIMS: 15″ WHITE SPOKE
REAR RAMP: 48″ X 71 1/2″ WITH FLATTENED EXPANDED METAL
2″ X 6″ PRESSURE TREATED DECKING
11″ SIDE AND FRONT RAILS
INSIDE TRAILER WIDTH:? 71 1/2″
INSIDE TRAILER LENGTH: 120″
GROSS VEHICLE WEIGHT RATING: 2,990 LBS.
SINGLE AXLE
2″? A-FRAME COUPLER
2,000 LB. A FRAME TOUNG JACK
APPROX. WEIGHT OF FINISHED TRAILER 970 LBS

6×10 Trailer is designed with heavy angle iron frame, with Channel frame tongue. 2″ x 6″ treated decking boards.

Fenders with DOT approved lighting.

2″ square tube axle with 3,500 Lb. leaf spring suspension.

15″ wheels and tires.

Safety chains with latch.

6×10 Utility Trailer Plans Recommended Purchased Parts

Listed below are all of the purchased parts required to build your own 6×10 Utility Trailer.


A-FRAME TRAILER COUPLER FITS 2IN. BALL, CHANNEL 5000LBS GVW


A-FRAME TOP-WIND JACK 3500 LB. CAPACITY


A-FRAME JACK CASTER 1200 LB.


JACK FOOT FOR A-FRAME JACK


SAFETY TOW CHAIN WITH S-HOOKS


TRAILER LIGHT KIT


CARRY-ON TRAILERS SINGLE-WHEEL STEEL FENDER WITH SKIRT- 32IN. LONG X 9IN. WIDE X 15 IN. HIGH


ULTRA-TOW HANGER KIT – SINGLE AXLE FOR 1 3/4IN. DOUBLE EYE SPRINGS


LEAF TRAILER SPRING-3 LEAVES, 2000 LB. CAPACITY / PAIR


5-HOLE HIGH-SPEED SPOKED RIM DESIGN TRAILER TIRE ASSEMBLY – ST205/75D-15


5-LUG HUB/SPINDLE END UNIT TRAILER AXLE SYSTEM 1750-LB. CAPACITY PER HUB MODEL #80117 


TIE DOWN ENGINEERING SPINDLE/FLANGES TRAILER AXLE SYSTEM 1750-LB. CAPACITY, 2-PC. SET


TIE DOWN ENGINEERING AXLE TUBE FOR BUILD YOUR OWN TRAILER AXLE SYSTEM 2IN. X 2IN. X 72IN., 3500-LB CAPACITY


TIE-BOLT U-BOLT SET-FITS 2IN. SQUARE AXLES, 2000—LB. CAPACITY

Reviews

There are no reviews yet.

Be the first to review “6×10 Utility Trailer Plans”

Your email address will not be published. Required fields are marked *

Scroll to Top