Truck Power Take Off
Build Your Own
Truck PTO - Power Take Off
Create long lasting high PTO horsepower from a truck axle that you can't get from a farm tractor. Complete PTO plans show you how to create POWER from a truck with these PTO PLANS while still having the ability to drive it.
Learn how to get 500 horsepower from your converted axle with this PTO Unit!
The plans are for a Rockwell International axle with a power divider.
SCROLL DOWN TO SEE ALL INFO AND BOTH POWER TAKE OFF VIDEO'S!
Our DIY PTO plans show you step by step exactly how to complete the conversion including pictures, plans, part numbers and procedures to modify the axle. These axles will work with medium and heavy duty trucks. Rockwell International axles are common to all trucks including Mack!
SEE ADDITIONAL INFO ON OUR
FREE EMAIL SUPPORT
JUST SOME APPLICATIONS FOR YOUR TRUCK PTO UNIT
Example One: Couple a grinder to a bagger or a grinder to a silage blower and use a N-14 cummins (500 HP) to power both.
Example Two: Mount 2 Engines on the bed of a truck for 1500 HP coupled to 9 grinders to grind 20,000 BU. per hour and travel highway speeds with your PTO UNIT ATTACHED between jobs.
Trucks may perform truck and PTO duties every day since converting from highway speeds to PTO is the flip of a switch.
Axle and gearboxes are pressure-lubed/cooled for 100% duty cycle. Move the axle to the next truck.
The axle installation is non-toxic. It does not alter DOT or insurance requirements.
SKILLS REQUIRED: Ability to use cutting torch and welder with average mechanical abilities. Occasionally drive shaft work is needed. Some use local repair shops to do the installations.
Some trucks in Ohio are operating at 95% total horsepower on lagoon manure pumps. They go 30 days+/24 hours (that's 500 HP) between job sites. One catepillar engine has logged over 12,000 hours in this EXTREME DUTY CYCLE. Change the oil and replace the belts. A farm tractor can not make that much power nor can they survive that duty cycle. To maybe put things in perspective; the average 3/4 ton truck is considered "under a hard pull" 15% of its life.
Tractors do not have a bed to haul or highway speeds for gooseneck trailer work. Some axles are rated at 22,000 lbs so power capabilities and load capacities are desirable.
$$$ POWER TAKE OFF SAVINGS $$$
A 10-speed truck transmission means 10-PTO speeds; shift up for fuel economy (20% savings on a manure pump) or shift down for more power. Trucks can be pulled VERY HARD on a 24 hr duty-cycle.
PTO power from aging farm tractors requires repairs (maybe $7500 if the tractor has to be split) while NEW tractors use the computer to derate HP while the PTO is engaged. (PTO is weak).
Build your own PTO and implement means your truck bed is available for hauling, gooseneck, pintle, ball,or 3-point hitches. Don't forget roll-off beds may be installed with engine or transmission driven hydraulic pumps.
FREE EMAIL SUPPORT
Start Building Your Power Take Off Unit Today!!!